Application and use

HERMAcoat recycling with 100 % recycled fibre is a sustainable and versatile label paper for multicolour printing. The natural white, semi-gloss coated surface of HERMAcoat recycling offers good print quality with all conventional printing methods. Thermal transfer printing is also possible, pre-testing is recommended. Due to the recycled fiber the paper has low tensile strength, which is why the production speed should not be too high.

The ecological advantage of recycled paper is mainly due to the significantly reduced water and energy requirements in fibre preparation and the elimination of long transport routes for primary fibres. 

 

The face paper has the "Blue Angel" ecolabel. 

The adhesive 62Gpt shows a very high tack even on cold surfaces down to -10 °C. Due to the high initial tack even on moist surfaces 62Gpt is particularly suited for labelling polar and nonpolar surfaces such as plastic containers, film wrappings and other packaging materials. The 62Gpt suits especially well for fast running dispensers, in which the initial tack has to be built up extremely quickly as f.ex. when the labels are blown on the substrate.Once labelled the adhesive is highly waterproof.

The supercalendered glassine is perfectly suited for assignment in labelling machines equipped with optical or mechanical scanners.

Processing

Excellent die-cutting characteristics on all customary machines. As part of a self-adhesive compound HERMA PH (523) offers excellent die-cutting characteristics with all customary flatbed and rotary die-cutting tools.

Storage conditions

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.

The shelf life is two years from date of production.

Regulations concerning contact with food

All ingredients of adhesive 62Gpt comply with recommendation BfR XIV or FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 62Gpt can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 10.10.2025).

The paper complies with recommendation BfR XXXVI.