Application and use

HERMApearly sun is ideal for labelling of wine, spirit and other beverage bottles.

HERMApearly sun is suitable for all traditional printing methods. Due to the textured surface of the label paper, best printing results can be achieved by using printing methods with a conformable printing plate. For the printing of very small and sophisticated elements offset printing is recommended.

The pulp for this paper is from FSC® certified forests and other controlled sources.

Suitability tests under application-specific conditions are recommended.

Adhesive 62A is a universally applicable permanent adhesive with excellent adhesion properties on various surfaces. It features very high adhesion on both polar and nonpolar (PE) surfaces. The adhesive is suitable for autoclave sterilisation, preferably in combination with vellum paper. The adhesive is highly water proof and particularly resistant to light, heat and ageing.

Typical uses for this biaxially stretched polyester film are high-speed labelling machines with optical or mechanical scanning.

Processing

Excellent die-cutting characteristics on all customary machines. In a self-adhesive compound HERMA PET offers excellent die-cutting characteristics with all usual flatbed and rotary die-cutting machines.

Storage conditions

Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.

The shelf life is four years from date of production.

Regulations concerning contact with food

All ingredients of adhesive 62A comply with recommendation FDA 21 CFR 175.105 (Adhesives).

The pressure-sensitive adhesive 62A can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 3 in accordance with Regulation (EU) No. 10/2011. Furthermore, the adhesive may be used for laminating various materials. In this case, cut edge contact with food is harmless as far as the above mentioned adhesive is concerned. It must be ensured that the relevant migration limits are complied with by the laminated packaging (Declaration of no objection valid until 29.11.2025).

Furthermore the self-adhesive labels with the adhesive 62A can be used for labelling of blood bags (Expert's Opinion from November 11, 2021).